How To Fix Brother Printer Drum Error At Your Own?

Brother printer is an international company based in Japan known for manufacturing printers and multifunction devices. Brother printers are used by millions of people all around the globe. But like every technical device, these devices also fall under faults and failures. And some of the issues can lead a device to permanent damage. So it is very important to fix these issues before it gets permanent. Hence, contact Brother Printer Repair Support Number and get complete measures to resolve any of the error without any hassle.

One of the errors that appear in brother printer and also in several other printer brands is drum error. If you are facing the same error, then do not worry. Today we have come with this article to fix this issue from your device. You can fix the brother printer drum error on your own by following this article till the end.

Steps to fix brother printer drum error

Step 1. Restart the printer

First of all, turn the printer off by pressing the power button.
Now, remove the power cord from the back as well as from the power outlet.
Wait for about 10 – 15 minutes to cool down the device.
After that, reconnect the power cable back to the device and power outlet.
A restart will often resolve many other errors.
After a restart, check for the error message. If the error code persists, move to the next step.

Steps 2. Clean the Corona Wire

Clean the corona wire inside the drum unit of your machine by gently sliding the green tab from right to left and left to right several times.
Now return the green tab to the home position at the far left side.
Note- If the green tab is not returned to the home position at the far left side, then this cloud results in a vertical stripe on the printed pages.
Clean the two small pieces of metal that look like staples and a metal rod striking out of the side. Clean each of these with a soft DRY cloth.
Reinstall the drum and the toner cartridge assemblies into the machine.
Close the front cover of the machine and make sure that it is seated properly.
Now check if the error persists or not. If Yes, follow the next instruction to change replace the toner cartridge.

Step 3. Replace the Toner and Cartridge.

Open the cover of the printing device by lifting up the cover.
Remove all the drum unit and toner cartridge assemblies.
Replace the Old drum and toner to the new genuine Brother toner cartridge.

Make sure that the cartridge you install is a brand new, unused genuine brother